Anker SOLIX · LiFePO4 (4,000 cycles @ ≥80%)
Anker SOLIX C1000 Gen 2 Runtime Calculator & Engineering Specs
Model A1763; 2,000 W continuous output in 1 kWh tier with verified 9-10 W AC idle draw.
Nominal / Usable AC
1024 Wh (~896 Wh AC)
AC Continuous / Inductive Surge
2000 W / 3000 W
SurgePad: 3000 W (resistive only)Solar Input & Idle Draw
600 W MPPT
11-60 V · Idle: 9.5 WWeight & Street Value
$0.56/useful Wh
24.9 lbs (11.3 kg) · $470–$5301. Active Appliances & Duty Cycle
1 load active
Modern Refrigerator120V AC
Source: U.S. DOE / ENERGY STAR Flip Your Fridge & EnergyGuide
Quick Try:
Locked Model TelemetryCompatible
Anker SOLIX C1000 Gen 2
1024 Wh · 2000 WEstimated Runtime14.5 h
Total Avg Draw (+Idle)62.0 W52.5W load + 9.5W idle
Continuous AC150 W
Sustained Peak150 W
Inductive Surge1200 W
Inverter Continuous Load150 / 2000 W (8%)
Inductive Surge 1200 / 3000 W (40%)
Verified Pure Sine Wave output required for motors, medical devices, or Active PFC PSUs.
Disable AC Eco Mode / Auto-Shutoff so the inverter stays awake between compressor or float-switch cycles.
Show Auditable Physics Breakdown
Wh_effective = 1024 Wh × 0.875 (eff) × 1.00 (temp) × 1.00 (res) = 896.0 Wh
Total_draw = 52.50 W (avg load) + 9.5 W (AC idle) = 62.00 W
Runtime = 896.0 / 62.00 = 14.5 h
Daily Gross Battery Energy: 1701 Wh/day
Anker SOLIX C1000 Gen 2 Verified Runtime Benchmark Table
Pre-computed at 68°F using 87.5% tested AC eff and 9.5 W verified AC idle.
| Appliance Benchmark | Mode & Avg Draw | Surge Required | Compatibility | Est. Runtime |
|---|---|---|---|---|
| CPAP Machine (No Heat, DC 12V/24V) | DC · 12.0 W total | 0 W | pass | 78.5 h |
| CPAP Machine (Humidifier + Heated Tube, AC) | AC · 54.5 W total | 75 W | pass | 16.4 h |
| Full-Size Refrigerator (Modern ENERGY STAR) | AC · 62.0 W total | 1200 W | pass | 14.5 h |
| Starlink Standard (Gen 3 Dish + Router) | AC · 94.5 W total | 135 W | pass | 9.5 h |
| Wi-Fi Router + Cable/Fiber Modem | AC · 24.5 W total | 0 W | pass | 36.6 h |
| Sump Pump 1/2 HP (Zoeller M98 LRA Spec) | AC · 171.5 W total | 3400 W | Fail L3 | 5.2 h |
Primary source: https://www.ankersolix.com/products/c1000-gen-2 · Lab test: Best Batteries (~85-90% mid-high load; drops to ~67-72% at very light 60 W load) · Idle test: Anker SOLIX official spec (9-10 W)
Frequently Asked Questions
How much usable AC energy does the Anker SOLIX C1000 Gen 2 actually deliver?+
From 1024 Wh nominal LiFePO4 capacity, independent testing (Best Batteries (~85-90% mid-high load; drops to ~67-72% at very light 60 W load)) measures roughly 88% AC efficiency (~896 Wh usable) before continuous AC inverter idle draw.
What is the surge and motor limit of the Anker SOLIX C1000 Gen 2?+
The Anker SOLIX C1000 Gen 2 delivers 2000 W continuous AC power and 3000 W peak inductive surge (plus 3000 W SurgePad for resistive heating loads).
How is battery cycle life rated on the Anker SOLIX C1000 Gen 2?+
Anker SOLIX C1000 Gen 2 uses LiFePO4 cells rated for 4,000 cycles to >=80% capacity retention.