Skip to main content
TrueWattLab
Menu

TrueWattLab Methodology & Data Verification Protocol

Every calculator on TrueWattLab runs on an automated, unit-tested physics model built to expose real-world energy losses and electrical constraints that simplistic generator sizing charts leave out.

1. Core Runtime & Conversion Equations

Usable capacity is modeled as Wh_effective = Capacity_Wh × η_mode × Temp_Factor × (1 - Safety_Reserve). AC mode applies verified independent test efficiency when available or a conservative 0.85 default; 100% DC/USB-C setups apply 0.92. Because modern LiFePO4 BMS controllers already protect bottom cell reserve, we do not double-deduct an arbitrary 20% Depth of Discharge unless you intentionally enable a planning buffer.

Runtime divides effective energy by Avg_Load_W + Inverter_Idle_W, capturing continuous AC inverter standby overhead (verified 5.5–35 W or conservative tier defaults of 8 W / 18 W / 30 W) and appliance duty cycles.

2. Three-Level Compatibility & Honest Nulls

  • Level 1 (Continuous AC): Total simultaneous running wattage must fit inside rated continuous AC output.
  • Level 2 (Sustained Peaks): Multi-minute loads such as pellet stove igniters (450 W for 4–8 min) or microwaves must fit inside continuous capacity, not 1-second surge.
  • Level 3 (Inductive Motor Surge): Locked Rotor Amps (LRA) compressor and pump spikes are tested solely against verified inductive surge specs. Resistive voltage-drop features (X-Boost, Power Lifting, SurgePad) are never treated as motor-starting power.
  • Zero Fabricated Specs: Where a manufacturer does not verify a separate inductive surge spec, AC idle draw, or independent efficiency test, we display Not Verified (N/V) or N/D transparently.

3. Primary Sources & Deep Technical Guides

Appliance and irradiance references are grounded in U.S. Department of Energy (DOE), EPA ENERGY STAR / EnergyGuide, NREL PVWatts V8, manufacturer manuals (EcoFlow, BLUETTI, Jackery, Anker SOLIX, ResMed, Zoeller, Wayne, Starlink, Dometic, Midea, Harman, Philips, Inogen), and independent lab testing (OutdoorGearLab, StorageReview, PCMag, APH Networks, TopSolarGear).